|
|
 |
 |
 |
Postgraduate Programme Structures for 2003/04 |
Department of Mechanical Engineering |
TEME-AFL09: PG Dip Power Transmission and Motion Control Systems |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50201 | Electromechanical energy conversion | 6 Credits |
| Optional Units: Select 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Accounting & finance | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50208 | Power transmission systems | 6 Credits |
| ME50216 | Diploma project | 12 Credits |
| Optional Units: Select 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
TEME-AFL10: PG Dip Fluid Power Systems |
Mode of attendance: Full time |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
| ME50216 | Diploma project | 12 Credits |
TEME-AFM01: MSc Dynamics and Control |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50151 | Control systems | 6 Credits |
| ME50155 | Mechanical vibrations & noise | 6 Credits |
| ME50190 | Systems modelling & simulation | 6 Credits |
| Optional Units: Select between 1 and 2 Unit(s) from the following list: |
| ME50152 | Structural mechanics | 6 Credits |
| ME50178 | Advanced control | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50181 | Computational fluid dynamics | 6 Credits |
| ME50193 | Vehicle dynamics | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM02: MSc Fluid Power Systems |
Mode of attendance: Full time |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM04: MSc Aerospace Engineering |
Mode of attendance: Full time |
Year 1, Semester 1 |
| Mandatory units |
| ME50154 | Aerodynamics | 6 Credits |
| ME50225 | Aircraft performance & design | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50151 | Control systems | 6 Credits |
| ME50187 | Heat transfer | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50153 | Thermofluid systems | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| ME50224 | Aircraft propulsion | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50166 | Aircraft stability & control | 6 Credits |
| ME50192 | Turbomachinery | 6 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list: |
| EG30061 | Aerospace Materials | 6 Credits |
| ME50169 | Aerospace structures & aeroelasticity | 6 Credits |
| ME50181 | Computational fluid dynamics | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM05: MSc Automotive Engineering |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50161 | Internal combustion engine technology | 6 Credits |
| ME50223 | Vehicle Engineering | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50151 | Control systems | 6 Credits |
| ME50187 | Heat transfer | 6 Credits |
| Optional Units: Select between 2 and 3 Unit(s) from the following list: |
| ME50155 | Mechanical vibrations & noise | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| ME50190 | Systems modelling & simulation | 6 Credits |
| ME50193 | Vehicle dynamics | 6 Credits |
| ME50206 | Energy & the environment | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM06: MSc Geometric Modelling and Design |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50167 | Computer aids for design | 6 Credits |
| ME50177 | Innovation & advanced design | 6 Credits |
| ME50186 | Geometric modelling | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50158 | Global product development | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50190 | Systems modelling & simulation | 6 Credits |
| ME50226 | Machines and products in society | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50170 | Manufacturing automation, modelling & simulation | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50205 | Reading unit | 6 Credits |
| Optional Units: Select 1 Unit(s) from the following list: |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM07: MSc Manufacturing Modelling |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| EG30022 | Materials selection in engineering design | 6 Credits |
| ME50170 | Manufacturing automation, modelling & simulation | 6 Credits |
| ME50186 | Geometric modelling | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50158 | Global product development | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME50159 | Manufacturing processes & analysis | 6 Credits |
| ME50167 | Computer aids for design | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50173 | Research methodology | 6 Credits |
| ME50176 | Project scoping | 12 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-AFM08: MSc Power Transmission and Motion Control Systems |
Mode of attendance: Full time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50201 | Electromechanical energy conversion | 6 Credits |
| Optional Units: Select 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Fundamentals of accounting and financial management | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50176 | Project scoping | 12 Credits |
| ME50208 | Power transmission systems | 6 Credits |
| Optional Units: Select 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
Year 1, Dissertation period |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-APC06: PG Cert Fluid Power Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| One ME5 unit to be selected from available units (pending approval) in either S1 or S2: | ||
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME5XXXX | Director of Studies approved unit (s) | 6 Credits |
Year 1, Semester 2 |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME5XXXX | Director of Studies approved unit (s) | 6 Credits |
TEME-APC12: PG Cert Power Transmission and Motion Control Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| ME50201 | Electromechanical energy conversion | 6 Credits |
|
One ME5 unit to be selected from available units (pending approval) in either S1 or S2: | ||
| Optional Units: Select between 0 and 1 Unit(s) from the following list: |
| ME5XXXX | Director of Studies approved unit (s) | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50208 | Power transmission systems | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list: | ||
| ME5XXXX | Director of Studies approved unit (s) | 6 Credits |
TEME-APL04: PG Dip Power Transmission and Motion Control Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
| Students must take units totalling 24-30 credits in year 1 (with a total of 60 credits for the programme) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50201 | Electromechanical energy conversion | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2): |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Accounting & finance | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50208 | Power transmission systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
Year 2, Semester 1 |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1): |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Accounting & finance | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 2, Semester 2 |
| Mandatory units |
| ME50216 | Diploma project | 12 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
TEME-APL05: PG Dip Fluid Power Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
| Students must take units totalling 24-30 credits in year 1 (with a total of 60 credits for the programme) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2): |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 1, Semester 2 |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 2, Semester 1 |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1): |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 2, Semester 2 |
| Mandatory units |
| ME50216 | Diploma project | 12 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
TEME-APM01: MSc Fluid Power Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
| Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2): |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 1, Semester 2 |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory, & must be selected in either year 1 or year 2): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 2, Semester 1 |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1): |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
Year 2, Semester 2 |
| Mandatory units |
| ME50176 | Project scoping | 12 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 3, Academic year |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-APM02: MSc Dynamics and Control |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
| Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme) | |
Year 1, Semester 1 |
| Mandatory units |
| ME50151 | Control systems | 6 Credits |
| ME50155 | Mechanical vibrations & noise | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2): |
| ME50190 | Systems modelling & simulation | 6 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list : |
| ME50152 | Structural mechanics | 6 Credits |
| ME50181 | Computational fluid dynamics | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| ME50193 | Vehicle dynamics | 6 Credits |
Year 1, Semester 2 |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (these units are mandatory & must be selected in either year 1 or year 2): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 2, Semester 1 |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1): |
| ME50190 | Systems modelling & simulation | 6 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list: |
| ME50152 | Structural mechanics | 6 Credits |
| ME50178 | Advanced control | 6 Credits |
| ME50181 | Computational fluid dynamics | 6 Credits |
| ME50183 | Finite element analysis | 6 Credits |
| ME50193 | Vehicle dynamics | 6 Credits |
Year 2, Semester 2 |
| Mandatory units |
| ME50176 | Project scoping | 12 Credits |
| Optional Units: Select between 0 and 3 Unit(s) from the following list (select those units not already taken in year 1): |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50208 | Power transmission systems | 6 Credits |
Year 3, Academic year |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
TEME-APM03: MSc Power Transmission and Motion Control Systems |
Mode of attendance: Part time |
| There may be some restrictions on, or alterations to, the availability of optional units (refer to timetable) |
| Students must take units totalling 24-30 credits in year 1 (with a total of 90 credits for the programme) |
Year 1, Semester 1 |
| Mandatory units |
| ME50145 | Introduction to hydraulic circuits & components | 6 Credits |
| ME50201 | Electromechanical energy conversion | 6 Credits |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit is mandatory & must be selected in either year 1 or year 2): |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Accounting & finance | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 1, Semester 2 |
| Mandatory units |
| ME50208 | Power transmission systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
Year 2, Semester 1 |
| Optional Units: Select between 0 and 1 Unit(s) from the following list (this unit must be selected if not already taken in year 1): |
| ME50147 | Component selection for hydraulic systems | 6 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50148 | Hydraulic systems design | 6 Credits |
| ME50150 | Introduction to control for electrohydraulic systems | 6 Credits |
| ME50151 | Control systems | 6 Credits |
| MN50170 | Accounting & finance | 6 Credits |
| MN50173 | Strategic information systems | 6 Credits |
Year 2, Semester 2 |
| Mandatory units |
| ME50176 | Project scoping | 12 Credits |
| Optional Units: Select between 0 and 2 Unit(s) from the following list: |
| ME50173 | Research methodology | 6 Credits |
| ME50194 | Practical instrumentation techniques | 6 Credits |
| ME50202 | Servo-electric drive performance & control | 6 Credits |
Year 3, Academic year |
| Mandatory units |
| ME50185 | Dissertation | 30 Credits |
|
|
|
Student Records & Examinations Office, University of Bath,
Bath BA2 7AY
|
Fax: +44 (0) 1225 386366