Text only

 University | Catalogues for 2005/06 | PG index for 2005/06
University of Bath logo - link to University home page
 

 

Postgraduate Programme Structures for 2005/06

Department of Mechanical Engineering

TEME-AFL09: PG Dip Power Transmission and Motion Control Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
ME50216 Diploma project 12 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

TEME-AFL10: PG Dip Fluid Power Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits
ME50216 Diploma project 12 Credits

TEME-AFM01: MSc Dynamics and Control

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50151 Control systems 6 Credits
ME50155 Mechanical vibrations & noise 6 Credits
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 1 and 2 Unit(s) from the following list:
ME50152 Structural mechanics 6 Credits
ME50178 Advanced control 6 Credits
ME50183 Finite element analysis 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50181 Computational fluid dynamics 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM02: MSc Fluid Power Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM04: MSc Aerospace Engineering

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50154 Aerodynamics 6 Credits
ME50225 Aircraft performance & design 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50151 Control systems 6 Credits
ME50187 Heat transfer 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50153 Thermofluid systems 6 Credits
ME50183 Finite element analysis 6 Credits
ME50224 Aircraft propulsion 6 Credits
Optional Units: Select between 1 and 3 Unit(s) from the following list:
ME30266 Aerospace Materials (EG30061) 6 Credits
ME50166 Aircraft stability & control 6 Credits
ME50169 Aerospace structures 1 6 Credits
ME50181 Computational fluid dynamics 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM05: MSc Automotive Engineering

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50161 Internal combustion engine technology 6 Credits
ME50223 Vehicle Engineering 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50151 Control systems 6 Credits
ME50187 Heat transfer 6 Credits
Optional Units: Select between 2 and 3 Unit(s) from the following list:
ME50155 Mechanical vibrations & noise 6 Credits
ME50183 Finite element analysis 6 Credits
ME50190 Systems modelling & simulation 6 Credits
ME50193 Vehicle dynamics 6 Credits
ME50206 Energy & the environment 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM06: MSc Geometric Modelling and Design

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50177 Innovation & advanced design 6 Credits
ME50186 Geometric modelling 6 Credits
ME50301 Digital design 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50183 Finite element analysis 6 Credits
ME50302 Product design and development 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50170 Manufacturing automation, modelling & simulation 6 Credits
ME50190 Systems modelling & simulation 6 Credits
ME50226 Machines and products in society 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50194 Practical instrumentation techniques 6 Credits
ME50205 Reading unit 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM07: MSc Manufacturing Modelling

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50170 Manufacturing automation, modelling & simulation 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50183 Finite element analysis 6 Credits
ME50302 Product design and development 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50159 Manufacturing processes & analysis 6 Credits
ME50301 Digital design 6 Credits
Optional Units: Select between 2 and 3 Unit(s) from the following list:
ME30264 Materials selection in engineering design (EG30022) 6 Credits
ME50186 Geometric modelling 6 Credits
ME50226 Machines and products in society 6 Credits

Year 1, Semester 2

Mandatory units
ME50173 Research methodology 6 Credits
ME50176 Project scoping 12 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-AFM08: MSc Power Transmission and Motion Control Systems

Mode of attendance: Full time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 1, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
ME50208 Power transmission systems 6 Credits
Optional Units: Select 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

Year 1, Dissertation period

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APC06: PG Cert Fluid Power Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ZZ50001 Director of Studies approved unit (s) 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 1 Unit(s) from the following list:
ZZ50001 Director of Studies approved unit (s) 6 Credits

TEME-APC12: PG Cert Power Transmission and Motion Control Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ZZ50001 Director of Studies approved unit (s) 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ZZ50001 Director of Studies approved unit (s) 6 Credits

TEME-APL04: PG Dip Power Transmission and Motion Control Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 2, Semester 2

Mandatory units
ME50216 Diploma project 12 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

TEME-APL05: PG Dip Fluid Power Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50216 Diploma project 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

TEME-APM01: MSc Fluid Power Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APM02: MSc Dynamics and Control

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50151 Control systems 6 Credits
ME50155 Mechanical vibrations & noise 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50152 Structural mechanics 6 Credits
ME50181 Computational fluid dynamics 6 Credits
ME50183 Finite element analysis 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 1, Semester 2

Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50190 Systems modelling & simulation 6 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50152 Structural mechanics 6 Credits
ME50178 Advanced control 6 Credits
ME50181 Computational fluid dynamics 6 Credits
ME50183 Finite element analysis 6 Credits
ME50193 Vehicle dynamics 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 3 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50208 Power transmission systems 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

TEME-APM03: MSc Power Transmission and Motion Control Systems

Mode of attendance: Part time


Year 1, Semester 1

Mandatory units
ME50145 Introduction to hydraulic circuits & components 6 Credits
ME50201 Electromechanical energy conversion 6 Credits
Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 1, Semester 2

Mandatory units
ME50208 Power transmission systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

Year 2, Semester 1

Optional Units: Select between 0 and 1 Unit(s) from the following list:
ME50147 Component selection for hydraulic systems 6 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50148 Hydraulic systems design 6 Credits
ME50150 Introduction to control for electrohydraulic systems 6 Credits
ME50151 Control systems 6 Credits
MN30170 Fundamentals of accounting and financial management 6 Credits

Year 2, Semester 2

Mandatory units
ME50176 Project scoping 12 Credits
Optional Units: Select between 0 and 2 Unit(s) from the following list:
ME50173 Research methodology 6 Credits
ME50194 Practical instrumentation techniques 6 Credits
ME50202 Servo-electric drive performance & control 6 Credits
MN50173 Information management 6 Credits

Year 3, Academic year

Mandatory units
ME50185 Dissertation 30 Credits

 

University | Catalogues for 2005/06 | PG index for 2005/06

Student Records & Examinations Office, University of Bath, Bath BA2 7AY
Tel: +44 (0) 1225 383019 Fax: +44 (0) 1225 386366
To request a copy of this information (Prospectus): Prospectus request
To report a problem with the catalogue click here

This page maintained by H.E.Buick@bath.ac.uk. Last update: 14 September, 2005

Copyright ©2005 University of Bath · Disclaimer · Privacy Statement